VHT FLAMEPROOF™ Coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is widely used by the automotive industry on exhaust systems, and the aerospace industry for jet engines, re-entry vehicles and other high temperature paint applications.

Temperature1300°F-2000°F (704°C-1093°C) Intermittent
 
Dry Time: Curing time required and can be done on or off vehicle (see below).
 
Applications: Headers, Exhaust Systems, Piston Domes, Inside Heads
 
Finish: Flat
Model: 22645
Kan benyttes på metal og tåler temperaturer op til + 600 ºC. Giver effektiv rustbeskyttelse. Kan benyttes på udstødningsrør, udendørs grill, komfur med mere. Brugsanvisning: Fladen rengøres grundigt for løs rust, snavs og fedt. Lad det tørre. Grundfarve er ikke nødvendigt. Ryst dåsen i m ...more
$14.32  Incl. VAT
( $11.46  Excl. VAT )
Availability: Leadtime is 1-2 uger, hvis udsolgt. day(s).

VHT FLAMEPROOF™ Coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is widely used by the automotive industry on exhaust systems, and the aerospace industry for jet engines, re-entry vehicles and other high temperature paint applications.
Temperature
1300°F-2000°F (704°C-1093°C) Intermittent
 
Dry Time
Curing time required and can be done on or off vehicle (see below).
Applications
Headers, Exhaust Systems, Piston Domes, Inside Heads
 
Finish
Flat

 

Coating System
VHT provides a high-performance coating system for the ultimate in protection and quality. The system includes surface preparation, primer, paint and clear coat.
Prime SP100 FLAMEPROOF™ Primer
Coat SPXXX FLAMEPROOF™ Color
Finish SP115 FLAMEPROOF™ Clear

 


VHT FLAMEPROOF™

Coating only attains its unique properties after correct curing (refer to instructions on the can).


On the Vehicle
Paint must be completely dry before curing
Run at idle for 10 minutes
Cool for 20 minutes
Run at idle for 20 minutes
Cool for 20 minute
Run under normal operating conditions for 30 minutes


Off the Vehicle
Paint must be completely dry before curing
Heat to 250°F (121°C) for 30 minutes
Cool for 30 minutes
Heat to 400°F (204°C) for 30 minutes
Cool for 30 minutes
Heat to 650°F (343°C ) for 30 minutes